We predict the production yield of a medical radioisotope ${}^{67}$ Cu using ${}^{67}$ Zn(n, p) ${}^{67}$ Cu and ${}^{68}$ Zn(n, pn) ${}^{67}$ Cu reactions with fast neutrons provided from laser-driven neutron sources. The neutrons were generated by the p+ ${}^9\mathrm{Be}$ and d+ ${}^9$ Be reactions with high-energy ions accelerated by laser–plasma interaction. We evaluated the yield to be (3.3 $\pm$ 0.5) $\times$ 10 ${}^5$ atoms for ${}^{67}$ Cu, corresponding to a radioactivity of 1.0 $\pm$ 0.2 Bq, for a Zn foil sample with a single laser shot. Using a simulation with this result, we estimated ${}^{67}$ Cu production with a high-frequency laser. The result suggests that it is possible to generate ${}^{67}$ Cu with a radioactivity of 270 MBq using a future laser system with a frequency of 10 Hz and 10,000-s radiation in a hospital.

Resorcinol/formaldehyde (RF) foam resin is an attractive material as a low-density target in high-power laser–plasma experiments because of its fine network structure, transparency in the visible region, and low-Z element (hydrogen, carbon, and oxygen) composition. In this study, we developed disk-shaped RF foam and deuterated RF foam targets with 40–200 μm thickness and approximately 100 mg/cm³ density having a network structure from 100 nm to a few micrometers cell size. By deuteration, the polymerization rate was drastically slowed down owing to kinetic isotope effects. These targets were used in high-power laser experiments where a megaelectronvolt proton beam was successfully generated.